Seven Issues That Will Make Your Well Pump Less Efficient

Posted on: 26 February 2021

You rely on your well pump for everyday operations at your facility. Maximizing well pump efficiency can reduce your overhead costs and prolong the lifespan of your well pump.

There are many issues you can address to improve well pump efficiency. The following are seven issues you may want to correct that can make your well pump less efficient. 

Neglecting needed maintenance

Well pump maintenance is important. Key maintenance includes replacing parts when they become worn out and inspecting valves and rings to make sure that they are still in good condition. 

Having pipes of the wrong diameter

You need to calculate carefully when you're determining the right pipe size for connecting your well pump. If your pipes are not the right size, you'll be more likely to experience problems that detract from efficiency like sedimentation and slurry settling. 

Using a pump that is not the right size

If your pump is too big, it's going to be less efficient than it should be. Unfortunately, oversized pumps are pretty common. Pumps that are too large consume too much energy because they have higher demands in terms of pressure and flow.

Consider replacing your well pump with a model that is more appropriately sized if you've been struggling with efficiency issues. 

Never having an energy audit done

Energy audits are key when you're making efforts to improve efficiency. It's especially important to have energy audits done when you are replacing your pump. Energy audits help you determine the total cost of operating your well pump. They can therefore make you more aware if well pump operating costs are higher than they should be. 

Choosing the wrong pump model

Some well pump models are more efficient than others. Making an investment in a newer and more efficient well pump model can pay off in the long run by saving you money on operating costs as time goes on. 

Failing to clean your well pump often enough

Simple cleanings are an important part of maintaining efficiency. Without periodic cleanings, there are a variety of problems that can develop, including clogs and leaks. Make sure you work routine cleanings of the inside and outside of your well pump into your maintenance schedule. 

Needing more training for your staff

Consider how much training your staff goes through before doing work involving your well pump. Make sure that staff members are trained to monitor pressure and flow rate carefully. Also, make sure that they know to recognize and report any irregularities right away. 

Check out websites like https://valleydrillingcorp.com to learn more.

Share