Key Advantages of Directional Boring For Utility Installation

Posted on: 13 April 2021

There are times when utilities have to be set up around potentially vulnerable areas, such as roadways and bodies of water. In these situations, directional boring is the best utility installation method available. It enables a much better installation process from start to finish.

Fast Process Thanks to Horizontal Direction

When traditional drilling methods are used to put in utilities underneath roadways and waterways, drilling usually takes quite a bit of time. That's because the drill goes down and then measures are taken to drill straight forward. That's a lot of dirt that has to be removed, which isn't a problem with directional boring.

It utilizes a horizontal direction the entire time, which means the boring drill machine can reach the target end site a lot faster. There's also less dirt that has to be removed, enabling utility installation crews a chance to work as efficiently as possible. 

Fewer Permit Headaches

No matter what type of drilling you plan on doing to get utilities in the ground around a particular location, permits are required. However, the process of getting them will be significantly less troublesome if you use directional boring as the installation method for utilities.

There isn't as much surface manipulation to nearby structures like there is with traditional digging. Therefore, you don't have to go out of your way to show that these drilling operations are safe and sound. The horizontal boring techniques have a minimal impact so permits should never become a concern that grows and grows. 

Unlimited Potential in Terms of Drilling Location 

If you stuck to traditional digging when putting utility lines in the ground, there are limits to where this drilling can take place. That's not what you want when carrying out an important utility installation for a particular client or governing body. The locations where you can drill are opened up significantly when directional boring is utilized.

As mentioned earlier, horizontal drilling takes place that can be angled to avoid obstructions. Then damage won't happen and the lines placed will be structurally sound even when around potentially vulnerable areas. Not having to worry as much about location limitations will make utility installation easier overall. 

To get utility lines placed properly and efficiently, sometimes directional boring is your go-to technique. It will help your entire drilling crew work smarter and quicker no matter what utilities you're dealing with. Contact local contractors to learn more about directional boring. 

Share